ENGLISH
30
8.
Join the parts of the workbench
together by aligning the angle posts
(A) to each other. Align the holes in
the post clamp (G) to the two holes
on the back of the back, middle
angle posts. Clamp the post clamp
to lock the angle posts together. Fit
the other post clamp on the two
front, middle angle posts.
NOTE:
Remove the post clamps with a
screwdriver, if necessary.
9.
Fit the post caps (E) on the ends of
the angle posts (A).
Check that the shelf supports are correctly
assembled.
Jula reserves the right to make changes. In the event of problems, please contact our service
department.
www.jula.com