ENGLISH
28
13.
Fit the remaining shelf supports (B
and C) at the required heights for
other two shelves. Tap on the
supports close to the joints to lock
the parts in place.
NOTE:
The crossbars and shelves can be
fitted in steps of 3.8 cm to the required
height.
14.
Place the shelves (D) on the shelf
supports (fig. 8).
15.
Fit the post caps (E) on the ends of
the angle posts (A).
Check that the shelf supports are correctly
assembled.
Alternative 2: Workbench
1.
Assemble the bottom part as per
steps 2 to 5 above.
2.
Fit two short and two long shelf
supports (C and B) in the upper
holes in the angle posts. Tap in the
pins in the bottom of the key-shaped
holes by tapping close to the joint
with a rubber mallet.
3.
Fit another two short and two long
shelf supports (C and B) at the
required height.
Shelf
Shelf support