ENGLISH
29
4.
Fit one short shelf support (C) in the
upper holes in two of the angle
brackets (A). Fit another short shelf
support in the 7th and 8th holes
from below in the angle posts. Tap
in the pins in the bottom of the key-
shaped holes by tapping close to
the joint with a rubber mallet.
5.
Repeat on the opposite side.
6.
Fit two long shelf supports (B) at the
top of the angle posts (A) and two
long shelf supports in the 7th and
8th holes in the angle posts. Tap in
the pins in the bottom of the key-
shaped holes by tapping close to
the joint with a rubber mallet.
7.
Place the shelves (D) on the shelf
supports.
7th and
8th holes
Shelf
Horizontal
side upwards
Correct
positioning
of shelf
support