ENGLISH
27
8.
Put the post inserts (F) in the angle
posts (A) on the bottom part.
9.
Put the top part on the post inserts
(F).
10.
Fit a short shelf support (C) over the
joint by tapping in the upper pin in
the lower key-shaped hole in the top
part and the lower pin in the upper
key-shaped hole on the bottom part.
Tap in the pins in the bottom of the
key-shaped holes by tapping close to
the joint with a rubber mallet.
11.
Repeat the last step to assemble
one other short shelf support (C) and
two long shelf supports (B).
12.
Fit two long shelf supports (B) at the
top of the angle posts (A). Check
that the pins rest against the holes
before tapping on the supports to
drive in the pins.