ENGLISH
8
ENGLISH
SAFETY INSTRUCTIONS
Please read these instructions carefully before use!
This product must only be used for its intended purpose as specified in these instructions.
Electrical safety
This product must be earthed. Follow the instructions below to modify the plug, if necessary.
Always secure wires in plug terminals carefully. Make sure the power cord is firmly secured in the
cord grip. NEVER connect the green and yellow earth wire to any terminal other than the one
marked with E or the earth symbol
.
Regularly inspect all electrical connections and wiring for damage. Any faults should be
immediately rectified before using the product.
Always have the wiring and connections checked by a qualified electrician.
Ensure all wiring and extension cables are kept clear of any cutting tools, sharp objects and any
other potential hazards, such as wet floors and solvents.
NOTE!
Contact an authorised electrician if the mains
wiring differs in any way from this diagram.
Check that the rated voltage for the product
corresponds to the mains supply voltage. Always
use a fuse that has the correct amperage rating.
IMPORTANT!
This product becomes very hot during use. Risk of burns. Keep combustible materials away from the
product. Ensure good ventilation to provide adequate cooling for the product.
ELECTRICAL SAFETY
New installations and extensions to existing systems must always be performed by a qualified electrician.
If you have the necessary experience and knowledge, you may replace switches and wall sockets, fit
plugs, extension cords and lamp holders. If not, you should contact an electrician. Improper installation
may result in electric shock or fire.
TECHNICAL DATA
Rated voltage
230 VAC, 50 Hz
Max. output
500 W
Protection rating
IP44
Halogen lamp
J118
Power cord
H05RN-F 3G 1.00 mm
2