POLSKI
9
Krok 4
Zamontuj koła, tak by wentyle
zwrócone były na zewnątrz. Kuliste łby
nakrętek muszą być skierowane do
wewnątrz. Najpierw lekko przykręć
nakrętki, ustaw wózek na kołach
i
dokręć nakrętki pod skosem
momentem obrotowym 76 Nm.
Krok 5
Przymocuj wspornik błotnika (A14) do
jednego z ramion błotnika (A8) za
pomocą czterech śrub M8x20, ośmiu
płaskich podkładek (po jednej przy łbie
śruby i przy nakrętce) i czterech
nakrętek blokujących M8. Powtórz
czynności dla drugiego błotnika.
Przymocuj jeden błotnik do osi (A7) za
pomocą dwóch śrub M8x20, czterech
płaskich podkładek (po jednej przy łbie
śruby i przy nakrętce) i dwóch nakrętek
blokujących M8. Zamontuj drugi błotnik
po drugiej stronie.
Krok 6
Przymocuj dwa wsporniki regulacyjne
(A9) do osi (A7) za pomocą dwóch
śrub M10x70, czterech płaskich
podkładek (po jednej przy łbie śruby
i
przy nakrętce) i dwóch nakrętek
blokujących M10.