ENGLISH
12
Step 4
Fit the wheels with the air valves
turned outwards. The dome head on
the nuts must face inwards. Tighten
the nuts loosely at first, put the boat
trailer on the wheels and tighten the
nuts diagonally to a torque of 76 Nm.
Step 5
Fit a fender bracket (A14) on one of
the fenders (A8) with four M8x20 bolts,
eight flat washers (one to bolt head,
one to nut) and four M8 lock nuts.
Repeat with the other fender.
Fit one of the fenders on the shaft (A7)
with two M8x20 bolts, four flat washers
(one to bolt head, one to nut) and two
M8 lock nuts. Fit the other fender on
the other side.
Step 6
Fit two adjusting brackets (A9) on the
shaft (A7) with two M10x70 bolts, four
flat washers (one to bolt head, one to
nut) and two M10 lock nuts.