22
•
Do not overreach. Always maintain a firm footing and good balance. This will ensure you have
better control over the tool in unexpected situations.
•
Wear appropriate clothing. Do not wear loose-fitting clothing or jewellery. Keep hair, clothing and
gloves away from moving parts. Loose-fitting clothing, jewellery and long hair can get caught in
moving parts.
•
If dust extraction and dust collection equipment is provided, this should be connected and used
correctly. The use of such devices can reduce the risk of dust related hazards.
•
Secure the workpiece with a clamp, vice or clips. This is safer than using your hands and means
you have both hands free to operate the tool.
Power tool use and care
•
Do not force the power tool. Always use the correct power tool for the job. The tool does the job
better and safer when used at the rate for which it was designed.
•
Do not use the tool if it cannot be switched on and off using the power switch. Power tools that
cannot be controlled with the power switch are dangerous and must be repaired.
•
Always disconnect the power cord from the mains power before making any adjustments, changing
accessories or putting the power tool away. These safety precautions reduce the risk of accidently
starting the power tool.
•
Keep power tools out of the reach of children when not in use. Never allow children, or anyone who
is unfamiliar with the power tool and these instructions, to use the tool. Power tools are dangerous
if used by inexperienced people.
•
Keep the power tool properly maintained. Make sure that moving parts are properly adjusted and
do not jam and that no parts are incorrectly fitted or damaged. Check for other factors that could
affect the operation of the power tool.
•
If the power tool is damaged, it must be repaired before being used again. Many accidents are
caused by poorly maintained power tools.
•
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to jam and are easier to control.
•
Use power tools, accessories, bits, etc. in accordance with these instructions, taking into account
actual working conditions and the work that is to be done. It can be dangerous to use power tools
for purposes other than those intended.
•
Damaged controls must be repaired by an authorised service centre. Do not use power tools that
cannot be turned on and off.
•
Power tools must never be left unattended when switched on. Always switch off the tool and wait
until it has completely stopped before leaving it.
•
If the power cord has been damaged, it must be replaced with the correct type of power cord.
These power cords are available from the manufacturer or an authorised service centre. The power
cord must only be replaced by the manufacturer or an authorised service centre.
Service
•
The power tool may only be repaired by an authorised service centre using original spare parts.
This ensures that the power tool functions correctly.
IMPORTANT:
The use of accessories or attachments other than those recommended in these Operating
Instructions can result in personal injury. Only use original spare parts.
Special safety instructions
•
Only use accessories approved for the maximum stroke rate of the tool.
•
Turn off the tool and wait until all moving parts have stopped completely before putting the tool
aside.
•
Never attach keys to the tool with string, etc.
•
Do not use abrasive paper for larger sanding sole. If abrasive paper protrudes from the sole it can
get caught and break or cause kickback or personal injury.
•
Secure the workpiece with a clamp, vice or clips.
•
Keep your hands away from the workpiece.
Summary of Contents for 010-638
Page 20: ...POLSKI 20 PRZEKR J...
