manualshive.com logo in svg

JUKI SC-920, Engineer'S Manual, Page: 36 / 75

Share
Download
JUKI SC-920 Engineer'S Manual Download Page 36

– 32 –

 

(3) Explanation of the operation panel (CP-18)

 switch : Used for changing over effective/ineffective of the reverse feed stitching pattern. 

 switch :  Used for changing over effective/ineffective of the overlapped stitching pattern. 

 switch  :  Used for confirming the contents of setting and for changing over effective/ineffective of 

the reverse feed stitching at sewing start.

 switch  :  Used  for  selecting the process (A, B, C, D) the number of stitches for which is to be 

changed. 

 

  * The selected process flashes on and off.

 

 switch : Used for changing the content of the selected display (flashing section) and for changing 

over effective/ineffective of the reverse stitch at sewing end.

 

  

 

switch :  Used for changing the content of the selected display (flashing section).

 

  

 

switch : Used for calling the production support function (by keeping the switch held pressed for 

two seconds).

Indicators 

 and 

 : Various pieces of information are displayed.

LED 

 

:  Lights up when the reverse feed stitching pattern is effective.

LED 

 :  Lights up when the overlapped stitching pattern is effective.

LED 

 :  Lights up when the production support function is displayed.

Summary of Contents for SC-920












































































Reviews:

No comments