JUKI SC-920, Engineer'S Manual, Page: 11 / 75

– 7 –
(3) Operation of the connection panel
1) Connecting procedure of CP-18/180 or IP-110F
Exclusive connectors are prepared for connection of the
connector for CP-18/180, IP-110F.
Paying attention to the orientation of the connector, con-
nect it to connector CN38 located on the circuit board.
After connecting, securely lock the connector.
1. After inserting the connector, put all cords together
with cable clip band )
4
located on the side of the
box.
(Caution) 1. Fix the cord clamp and the cable clip
band
)
following the attaching
procedure.
2. When removing the connector, re-
move it from the wire saddle and
remove it while pressing the hook of
the cable clip band
)
.
How to fix cable clip band
) ) How to remove cable clip band
Pushing the hook portion, push the band to remove it.
Pull
Push
Push the hook.
4
/
Panel
Panel
)
[Connection of the connector for CP, IP panel]
(Caution) Be sure to turn OFF the power before
connecting the connector.