– 11 –
4) Rectangular stitching pattern
OFF
ON
OFF
ON
OFF
OFF
ON
ON
Sewing pattern
1. Press rectangular stitching pattern switch
on the control panel to select the rectangular stitching pattern.
2. The rectangular stitching pattern is selected. Now, the predetermined number of stitches and other sewing data
are shown on the control panel.
3. To change the number of stitches of the processes in the rectangular stitching pattern, operate switches
(for
processes C and D) to change the number of stitches for processes C and D.
Select the reverse feed stitching accordingly. To change the number of reverse-feed stitches, operate switches
for setting the number of stitches for processes A and B.
(Adjustable range : A, B = 0 to 19 stitches, C, D = 0 to 99 stitches)
4. Four different kinds of stitching patterns can be performed according to the combination of ON/OFF settings of
automatic reverse stitching (for start) switch
and automatic reverse stitching (for end) switch
.
5. Furthermore, the double reverse stitching mode can be specified by operating double reverse stitching (for start)
switch
and double reverse stitching (for end) switch
.
When the touchback switch is operated at this time, the sewing machine runs at a low speed (compensating stitching). If the
automatic thread trimming switch
is not specified, sewing can be continued regardless of the setting of the
number of stitches when the pedal is returned to its neutral position and its front part is depressed again after the
final step has been automatically stopped.
6. If automatic thread trimming switch
is turned ON, the sewing machine will automatically perform thread trimming
after the completion of the last process. (If the automatic reverse stitching (for end) is selected, the sewing machine
will automatically perform thread trimming after it finishes the automatic reverse stitching (for end).)
7. If thread trimming prohibiting function
is chosen, the machine will stop with the needle up without performing
thread trimming.
8. If one-shot automatic stitching function
is chosen, the machine will automatically perform sewing at a stretch
until the number of stitches specified is reached, at the predetermined sewing speed by depressing the pedal
while the sewing machine is engaged in the sewing of process C or D. The machine performs thread trimming in
the last process of one-shot automatic stitching pattern.
9. For the sewing machine equipped with an auto-lifter, the presser foot will automatically go up after the completion
of each sewing process.
D
C
D
C
D
C
D
C
B
A
A
B
D
C
D
C
A
B
D
C
D
C
B
A
