– 64 –
Classifica
-
tion of pa-
rameters
No.
Parameter name
Range
Standard
value
Meaning of parameter and comment
Other
settings
P74
Whether or not the air
pressure detection is
required
Yes/No
No
In the case of "Yes", the sewing ma-
chine stops and generates the alarm if
the detected air pressure is low during
work
P75
Whether or not the
repetitive operation is
required
Yes/No
No
"Yes" means that cyclic machining of
the same file is started after turning the
power ON
P76
Repetitive machining
time (min)
1 to 65535
1440
Cyclic machining total time: When the
set time has elapsed, cyclic machining
is stopped
P77
Repetitive machining
interval (s)
0 to 20
2
Interval from the completion of machin-
ing to re-starting of machining under the
cyclic machining mode
P78
Work ending position
Return to 0 (zero)
/ sewing starting
position / default
Return to
0 (zero)
Return to 0 (zero): All of x / y axes
coordinates return to 0 (zero); sewing
machine terminates sewing; reset point
Right side: Rightmost position within the
machining range
Sewing starting position: First sewing
point of the machining file
Default: The sewing machine stops after
the completion of machining
P395
Template recognition
method
Barcode / elec-
tronic label
Electronic
label
By serial number of file: Barcode identi
-
fication mode
By file name:
Electronic label
identifica
-
tion mode
P81
Interface style
Classic / simple
Classic
Classic: Button style of the virtual body
Simple: Flat button style
P681
Motion mode is started
before operation
XY simultaneous /
X precedence / Y
precedence
XY simul-
taneous
P755
Jump mode during op-
eration
X precedence / Y
precedence / XY
simultaneous
X prece-
dence
Jump travel mode
P241
Connection to the ex-
tended screen
Yes/No
No
In the case of "Use", information on the
operation file can be displayed on the
external add-on display
P79
Reverse feed after main
shaft needle stops
0 to 160
0
P242
Voice prompt
High / medium /
low / OFF
OFF
"High", "medium" and "low" respectively
refer to the magnitude of sound
P21
Enabling the memory
function during power
failure
Enable / disable
Enable
After re-energization of the sewing
machine, the sewing sequence carried
out before power failure is resumed to
continue sewing from that interrupted
sequence.
P194
The file is enabled upon
separation of the elec-
tronic label
Enable / disable
Disable
