JUKI PS-900-13090, Instruction Manual

Page: 64 / 99

– 61 –
Classifica -
tion of pa-
rameters
No. Parameter name Range
Standard
value
Meaning of parameter and comment
Speed
parameter
P19 Button sewing speed
3 after the button is
pressed (mm/min)
100 to 20000 8000 Eight direction keys are supported
Operation speed using
icon
P174 Machine head 2 speed
(mm/s)
0 to 2000 0 XY axes speed when using a laser knife
P175 Machine head 3 speed
(mm/s)
0 to 2000 0 XY axes speed when using a laser knife
P178 Continuous inching
speed
Reduce / mini-
mum / normal
Reduce Travel speed during pattern creation
P773 Number of revolutions
in the reverse direction
(r/min)
0 to 3000 0 Reverse feed stitching speed
P774 Number of stitches to be
sewn at a limited speed
at the end of sewing
0 to 30 0 Setting of the number of stitch from
which the sewing speed is limited at the
end of sewing a pattern
P775 Limited sewing speed to
be employed at the end
of sewing
100 to 1800 0 This parameter is used in combination
with P774 to obtain the specific limited
speed value.
Clamp
setting
P22 Prohibition of sewing
during lifting of the
clamp
Yes/No Yes Prohibition of sewing during lifting of the
cassette clamp
P25 Thread clamp starting
angle at the beginning
of sewing
1 to 990 10 Thread clamp ON angle at the begin-
ning of sewing
P26 Thread clamp ending
angle at the beginning
of sewing
1 to 990 10 Thread clamp OFF angle at the begin-
ning of sewing
P27 Thread clamp starting
angle during thread
trimming
1 to 990 15 Thread clamp starting angle during
thread trimming
P28 Thread clamp ending
angle during thread
trimming
1 to 990 180 Thread clamp ending angle during
thread trimming
P781 Whether or not the
clamp is required during
travel
Yes/No No
P743 Delay in opening of the
double clamp (ms)
0 to 5000 0
P744 Delay in lowering of the
double clamp (ms)
0 to 5000 0
Bobbin
winder
setting
P29 Bobbin winder status Allowed / prohibit-
ed
Allowed Bobbin winder
Default state
P30 Winding speed (r/min) 100 to 4500 2200 Bobbin winding speed
P31 Bobbin winding time
setting (s)
1 to 63000 200 Time setting of bobbin winding
Reset
setting
P36 Clamp at the time of
resetting
Yes/No No Cassette clamp comes down when
returning to origin
P264 Clamp is opened after
manual resetting
Yes/No Yes Cassette clamp goes up when returning
to origin by pressing the reset button
P38 Return-to-origin method XY simultaneous
/ X preference / Y
preference
XY simul-
taneous
"xy simultaneous" means that the x and
y axes are simultaneously reset to their
origins. "x preference" means that the
x axis is firstly reset to the origin, and
"y preference" means that the y axis is
firstly reset to the origin.