– 44 –
4-14. Adjusting the needle hole in the throat plate and the needle
In the case the needle does not come down to the
center of needle hole in the throat plate, the position
of the throat plate can be finely adjusted with screws
❶
❷
and
❸
.
1) Loosen screws
❷
and
❸
and lightly loosen
screw
❶
. Then, move the throat plate to adjust
so that the needle is aligned with the center of
needle hole in the throat plate.
2) Tighten
❶
. Then, tighten
❷
and
❸
.
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
❸
❸
❶
❶
❷
❷
