– 14 –
* The scale markings on the stitch dial are shown in mm.
[LS-2342S, H]
Turn standard feed adjusting dial
❶
to align the desired
number with marker dot
❸
on the machine dial.
[LS-2342S-7, 2342H-7]
Turn standard feed adjusting dial
❶
and 2P feed adjusting
dial
❷
while pressing stopper
❼
in the direction of arrow
A
(toward the back of the arm) to align the desired num-
ber with marker dot
❸
on the machine dial.
Release stopper
❼
to fix standard feed adjusting dial
❶
and 2P feed adjusting dial
❷
.
(1) Reverse feed stitching
1) Press down reverse feed control lever
❹
.
2) Reverse feed stitches are made as long as you keep
pressing the lever down.
3) Release the lever, and the machine will run in the nor-
mal feed direction.
(2) Manual one-touch reverse feed stitching (LS-
2342S-7, 2342H-7)
1) Press touch-back switch
❺
.
2) Reverse feed stitches are made as long as you keep
pressing the lever down.
3) Release the switch, and the machine will run in the
normal feed direction.
(3) Changing over the stitching pitch
(LS-2342S-7, 2342H-7)
1) Press stitching pitch changeover switch
❻
to change
over the stitch length to the one corresponding to the
scale mark on the 2P feed adjusting dial. (The LED on
the switch lights up.)
1. Set 2P feed adjusting dial
❷
at a value smaller than the value set by standard feed adjusting dial
❶
.
2. Adjust the 2P feed adjusting dial when the stitching pitch changeover switch is placed in OFF.
3. Scale mark on the 2P feed adjusting dial smaller than 3 (at which the dial is stopped by the dial stop-
per) is used for the 0 (zero) alignment of the 2P dial. Scale marks smaller than 3 cannot be used.
"5-5. Operation switches" p.22
for the details of the 2P device.
4-1. Adjusting the stitch length
4. ADJUSTING THE SEWING MACHINE
❻
❺
❸
❷
❼
❼
A
A
❶
❹
❸
B
To change the scale marking on the standard
stitch dial
❶
to a smaller one, turn standard
stitch dial
❶
while pushing feed lever
❹
in the
direction of arrow
B
(downward) and stopper
❼
in direction of arrow
A
(toward the far side
of arm).
