JUKI AMS-210EN Series, Engineer'S Manual

Page: 111 / 249

– 104 –
3) Port I/O setup
To make output number setting, input number set-
ting, and virtual I/O number setting, the setup button
(G) is pressed to enter an input of the setting
function number (H) in the selected terminal through
the ten key (I). The signal type is selected from High
(J) and Low (K). In the case of virtual I/O number
setting, it is selected from output and input .
To make switch operation setting, the setup button
(L) is pressed to select the signal type from High
(M) and Low (N).
B
G
F
E
L
J
K
H
I
N
M