background image

Video CatCam User Manual - Page 10 of 10 

 

of your pet. In the USA are collars common which provide a safety release if a certain 
amount of force is applied. Everything mounted to the collar will be lost in such a case. 
Please decide what is more important: The life of your pet or the device on the collar. 
 
 

7. Video Storage and Download 

 
The video recordings are stored in AVI format. We recommend using the free VLC 
player which has several codec’s already integrated. VLC is also working with different 
operation systems. 
 
To download the recordings open the camera as described before and connect the cable 
to the USB interface. The computer should recognize the camera as an additional drive. 
If this not the case check if the camera is switched off before connecting it to the 
computer. 
Now you can copy and erase files like on a regular hard disk. 
 

Note:

 Prior to disconnecting the camera from the computer make sure you stopped it 

with the device manager. Otherwise the file system of the camera may be screwed up.  
 
 

8. Support and Help 

 
You can get in contact with the technical support by sending a mail to 

[email protected]

 

 
If your CatCam got damaged or you want to update to newer software contact also the 
technical support.  

 

Summary of Contents for Video CatCam II











Reviews: