background image

JPK 3

5

Intended Use

2.

Intended Use

The installation and  application of the
sample water cooler are subject to such na-
tional provisions as are in force.

Besides the operation instructions, the bin-
ding regulations being in force in the users
country and at the place of the mounting
concerning the accident-prevention  the ac-
cepted rules for security-accordant  and
field-specific working have to be also obser-
ved.

The sample water cooler is appropriate for
the use in heating circuits up to a water tem-
perature of the heat water of maximum
100°C (212°F).

It has been manufactured according to the
state-of-the-art and the recognized  safety-
related rules, valid in Germany.

The sample water cooler may exclusively be
used as described in the operation instruc-
tions. Another utilization or any utilization
going beyond these ones  is to be conside-
red  as non-appropriate.

There are additional dangers when not
being used as intended, and if the danger
symbols

and the security advices are not observed.

For damages resulting from this, the manuf-
acturer / supplier are not liable. The risk
takes the user himself.

To the intended use belongs also the obser-
vance of the operation instructions.

Before using the sample water cooler bey-
ond the utilization limits stated in the opera-
tion manual the manufacturer / supplier ha-
ve by all means to be contacted.

The sample water coolers  are only to be
used in impeccable condition  as well as in-
tended,  safety-conscious   and danger-
conscious with respect to the operation ma-
nual.

Have function faults to be eliminated wit-
hout any delay.

For protection against scalds and burns
at first the cooling?  water and then the
hot water have to be turned on.

For the prevention of burns the skin con-
tact has to be avoided.

2.1

Indication of Special Dangers

2.1.1 Electric Apparatus / 

Installations

Electric apparatus / installations not being
splashing water protected and that are near
to the sample water cooler, can be damaged
through water that escapes during the back-
washing  or in case of in-appropriate use.

If the electric devices / installations are con-
nected to the power supply,  a short-circuit
can be caused. In this case persons are in
danger  to get an  electric shock. Electric de-
vices / installations being close by here have
therefore to be splashing water protected re-
spectively they have to be in accordance
with the statutory prescriptions for wet
rooms.

Any electric mains and devices
mustn’t be in immediate proximity
to the sample water cooler!

Summary of Contents for JPK 3

















Reviews: