Installation
3.5
Connecting the softening unit to the salt reservoir
Fig. 6:
Connecting the softening unit to the salt reservoir
1
Jacket hose
2
Lance
3
Salt reservoir
4
Marking arrow,
unlocked
position
5
Marking arrow,
locked
position
Position the salt reservoir either below or
next to the softening unit on the floor.
ATTENTION: Ensure that the jacket hose
is run with a constant slope from the
softening unit to the salt reservoir!
Procedure:
1.
Push the lance in as far as it will go into
the salt reservoir.
Attention! Note the marking arrow
- the arrow must point to the side
(
unlocked
position)
.
10
JUDO QUICKSOFT MEGA 6
1703525 • 2022/10
