4
Assembly
1.
WORKING SPACE
1.1 Set a 2 x 2.5 square meter working space before unpacking your Tri-Fit.
2.
PREPARATION
2.1 Use a sharp knife to remove all straps and cut all tape on the lowest edge of the box. After cutting
this lower tape, you will be able to gently lift the main box upwards away from the machine.
2.2 Remove all loose components.
2.3 Refer to the
CHECK LIST
and check that everything is present.
3.
REAR STABILIZER TUBE INSTALLATION
3.1 Use a piece of foam to raise the Main Frame [A01] for easier
installation.
3.2 Assemble the Rear Stabilizer Tube [A08] to the rear curve plate of
Main
Frame [A01] with 2 Screws 3/8”
[B11] and 2 Spring Washer
3/8”
[B48]
and 2 Washers 3/8”
[B10].
ENSURE THE SCREWS ARE TIGHT.
4.
FRONT STABILIZER TUBE INSTALLATION
4.1 Assemble the Front Stabilizer Tube [A07] to front curve plate of Main Frame [A01]
with 2 Screws 3/8”
[B11] and 2 Spring Washer
3/8”
[B48]
and 2 Washers 3/8”
[B10]..
ENSURE THE SCREWS ARE TIGHT.
5.
ADJUST THE ADJUSTABLE FOOT PAD
5.1 Adjust the Adjustable Feet [C13] at the Rear Stabilizer Tube [A08] and Front Stabilizer [A07] as needed to level
the elliptical trainer.
5.2 The elliptical trainer has to be leveled to prevent it from wobble or shaking during use.
B11
B10
A08
A01
Styrofoam
B48
A07
B10
B11
A01
Styrofoam
B48
Summary of Contents for Trifit
Page 1: ...JTX Trifit ...
