5
Assembly
6.
UPRIGHT POST INSTALLATION
6.1 This assembly step requires 2 people.
6.2 Firstly, slide the plastic casing assembly set (A) to the Upright Post [A02].
6.3 Connect all matching connectors from Upright Post [A02] and Main
Frame [A01], then slide extra length of cables into the opening of
Main Frame [A01].
DO NOT FOLD THE CABLES.
6.4 Assemble the Upright Post [A02] to Main Frame [A01] with 6 Screws M8
[B02] and 6 Spring Washer M8 [B49]and 6 Curve Washers M8 [B01].
ENSURE SCREWS ARE TIGHT.
6.5 Finally, slide the assembly set (A) down and firmly tighten.
7.
ADJUSTABLE KNOB INSTALLATION
7.1 Align the hole of the Adjustable Stride Disc [C19] with the pivot of the Foot Pedal Tube [A06]. Slide the Right
Adjustable Knob [C31] into the threads of the pivot. Use the spanner provided to lock the Adjustable Knob [C31]
to the thread. Turn the Right Adjustable Knob [C31] clockwise to ensure the knob is fully tightened. Make sure
that you turn the knob with the spanner and align the position mark as illustrated to the inner edge of Foot Pedal
Tube(A06). Repeat the same procedure to install the Left Adjustable Knob [13]. Turn the Left Adjustable Knob
[C13] counterclockwise to make sure the knob is fully tightened. Make sure that the stride number on both sides.
ENSURE STRIDE KNOB IS SECURED TIGHTLY.
A06
C19
Connector
A06
C31
(A)
Adjustable Range
Diamond Mark
Stride Number
Inner Edge of
Foot Pedal
Tube
Position
Mark
Position
Mark
Position
Mark
(B )
(A )
C06
C27
A01
B02
B01
A02
B49
Summary of Contents for Trifit
Page 1: ...JTX Trifit ...
