www.modellmarkt24.ch
If you would like, the battery can be mounted on the
opposite side of the receiver and ESC to save some space. To
do this, simply cut a small hole into the foam and and guide
the connector through to the battery side of the airplane.
**Location of the battery is personal preference and is
dependent on the size and weight of the battery, as well as
where the RX is located. For starting point, it may be a good
idea to mount the battery in the region of the aileron servo and
wing spar. Everyone prefers a different feel for their CG
adjustments**
Provided in the kit is the EPP stand used to slide over the
fuselage. Assembly is shown as above.
www.modellmarkt24.ch