www.modellmarkt24.ch
that the landing gear positioning is correct to allow the
airplane to sit level on the ground. Once this is confirmed,
you can then glue in the carbon fiber into the opposite sides
of the wing as well as where the two pieces of the landing
gear join in the fuse.
Now, you can apply the foam landing gear covers. Once you
make sure that the carbon fiber rod of the landing gear is
fully inserted into the slots, you can apply glue to the
connection at the bottom of the cover as well as at the top
where it joins the fuselage. Also, make sure to put glue along
the landing gear to ensure the covers will stay flush.
www.modellmarkt24.ch