JST
CMKS-L INDUSTRY STANDARD APPLICATOR
H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Applicators and Die sets\TS174-00
CMKS-L Manual.doc
7
4. LOWER DIE PARTS
4.1 ASSEMBLING LOWER DIE PARTS
To ensure the lower die parts are assembled in the correct orientation the engraved
part numbers must always be facing outwards.
The parts must be fitted in the correct order as detailed below:
1.
Die Block (105)
2.
Die spacer (149)
3.
Conductor anvil (153)
4.
Insulation anvil (154)
5.
Shear Blade (150) + (151)
When all the above are in place, using 2 x 5mm hexagon screws gently tighten the
die parts into position.
IMPORTANT
When these parts are positioned it is essential that they are knocked down flat
against the Die plate, preferably using a piece ofnon-ferrous metal (brass) to avoid
damaging the anvil parts.
(105) Die block
(150) Shear blade
(151) Shear blade Anvil
(153) Conductor Anvil
(154) Insulation Anvil
(104) Die Plate
Die Spacer (149)
