9
H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation
Manual.doc
Step 6
Tighten the screws and check that the guards are
correctly and securely fitted.
When using the MKS-L Applicator
Step 1
Secure the fabricated steel guard (JST UK-7), to the
applicator using the cap head socket screws supplied.
Step 2
Secure the die guard (JST UK-6), onto the applicator
using the cap head socket screws supplied.
Step 3
Select the appropriate side guard (JST UK-3), and mount
onto the side guard support bracket (JST UK-9), using
the countersunk screws provided.
Step 4
Remove the two upper motor fixing screws and clamp
the side guard support bracket onto the press utilizing
these screws.
Step 5
Adjust the side guard support to achieve the best
relationship between guard and applicator.
Step 6
Tighten the screws and check that the guards are
correctly and securely fitted.