11
H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation
Manual.doc
When using the MKF-L Applicator
Step 1
Secure the fabricated steel guard (JST UK-35), to the
applicator using the cap head screw supplied.
Step 2
Select the appropriate side guard (JST UK-95), and
mount onto the side guard support bracket (JST UK-9),
using the countersunk screws supplied.
Step 3
Remove the two upper motor fixing screws and clamp
the side guard support bracket onto the press utilizing
these screws.
Step 4
Adjust the side guard support bracket to achieve the best
relationship between guard and applicator.
Step 5
Tighten the screws and check that the guards are
correctly and securely fitted.
IMPORTANT
If the safety guards become damaged or worn
they must be replaced immediately.
Please contact the JST Technical Department
for replacement guards.