20
H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation
Manual.doc
Step 3
Firmly grip the fly-wheel on both sides and pull off the
end of the shaft. There are seven ‘stick rollers’ inside the
clutch and they may fall out when the fly-wheel is pulled
off the shaft, so take care not to lose any.
Step 4
Remove any traces of old grease from all components of
the clutch mechanism and sparingly lubricate all the
clutch components with fresh grease.
Specified Grease: Multemp PS no.1 manufac-
tured by Kyodo Yushi Co Ltd.
Do not use general purpose grease because
the clutch will not function correctly.
Contact JST Technical Services Department
for details of grease stockists.
Step 5
Assemble the clutch ensuring that the clutch lever is
engaged correctly with the clutch cam, as in photo A.
If the clutch is assembled as in photo B, it will not be
possible to re-mount the flywheel onto the shaft.
PHOTO A
PHOTO B
`