8
H:\0 - Quality Documents\2 Department\Tech Serv\Application tooling\Presses\AP-K2N\TS010-00 AP-K2N Operation
Manual.doc
Illustration of Terminal reels mounted on the AP-K2N Crimping Machine
MK-L MKS-L
3.4 Mounting the safety guard
For reasons of safety and to comply with legislation,
safety guards must always be mounted to the crimping
machine. The above photographs illustrate the AP-K2N
crimping machine with the safety guards fitted.
The following photographs illustrate the different types of
guards available for the range of JST applicators.
WARNING
AN AUTHORISED COMPETENT PERSON
MUST ONLY CARRY OUT THE
FOLLOWING OPERATIONS.
When using the MK-L Applicator.
Step 1
Secure the fabricated steel guard (JST UK-7), onto the
Applicator using the cap head socket screws supplied.
Step 2
Secure the die guard (JST UK-1), onto the applicator
using the cap head socket screws supplied.
Step 3
Select the appropriate side guard (JST UK-4), and mount
onto the side guard support bracket (JST UK-9), using
the countersunk screws supplied.
Step 4
Remove the two upper motor fixing screws and clamp
the side guard support bracket onto the press utilising
these screws.
Step 5
Adjust the side guard support to achieve the best
relationship between guard and applicator.