- 10 -
Low-Cost Programmable Transmitters P5310, P5311 with LHP Communication
Output (current loop, terminal 5 and 6):
U
i
= 30 VDC
I
i
= 100 mA
P
i
= 0.9 W
L
i
= 350 µH
C
i
= 0 nF
Output test (terminal 6 and 7; it is designed only for temporary
connection of a multimeter):
U
o
= 30 VDC
I
o
= 100 mA
P
o
= 0.9 W
L
o
= 100 µH
C
o
= 0 nF
Input for a sensor:
U
o
= 6.6 VDC
I
o
= 21 mA
P
o
= 0.034 W
L
o
= 70 mH
C
o
= 1 µF
For other conditions see paragraph 4.1.2.
6.5 Limiting conditions of use of a transmitter
in version with code EN2
See paragraph 4.1.3.
Type
Description
P5310
Low-cost programmable transmitter with LHP protocol without galvanic isolation (accuracy 0,1 %)
P5311
Low-cost programmable transmitter with LHP protocol with galvanic isolation (accuracy 0,15 %)
Code
Version
H10
Into head B according to DIN, universal for resistance sensors and thermocouples
H11
Into head B according to DIN, only for resistance sensors
L10
On the rail TS 35, universal for resistance sensors and thermocouples
L11
On the rail TS 35, only for resistance sensors
Code
Setting requirements
NR
Without requirements for the range and input setting (preset - Pt100, three-wire connection of sensor, 0 to 100 °C)
QR
Range and other parameters setting according to configuration sheet DB2298
Code
Calibration
KPP5
Transmitter calibration in five points evenly distributed in setting range
Kód
Optional version
EI1
Intrinsically safe version (Ex) II 1G Ex ia IIC T4-T6 Ga, (Ex) II 1D Ex ia IIIC T106°C Da (only for version P5311 H1x)
EN2
Non-incendive design (Ex) II 3G Ex nA IIC T4 Gc
Code
Optional accessories
LHPWinCom
Set of configuration program LHPWinConf (CZ+EN) for PC and modem HARTMod
LHPConf
HARTConf
HART-USB modem and field communicator for LHP and HART transmitters, function of transmitter supply
supplied from USB or inbuilt accumulator, charged from USB
HARTMod
Miniature HART modem with galvanic isolation
USB-RS232C
Communication interface for to USB port of the PC
PT1000A
Compensation resistor Pt1000 (-30 to +150 °C) for external compensation of thermocouple
S51
Box for wall mounting of one transmitter to explosive atmosphere (IP 68)
(Ex) II 2G Ex d IIC T6, T5 Gb + (Ex) II 2D Ex t IIIC T50/60/80°C Db (2 cable glands KMEx have to be ordered)
S52
Box for wall mounting of one transmitter with LED display to explosive atmosphere (IP 68)
(Ex) II 2G Ex d IIC T6, T5 Gb + (Ex) II 2D Ex t IIIC T50/60/80°C Db (2 cable glands KMEx have to be ordered)
S54
Wall mounted box (100x100x58 mm), housing IP 65 (for H1x versions, not for EI1, EN2)
1)
S55
Wall mounted box (170x145x85 mm), housing IP 55 (for L1x versions, not for EI1, EN2)
2)
S56
Wall mounted box (100x100x58 mm), housing IP 65 (for H1x versions, not for EI1, EN2)
3)
VH1
Cap for head form B for transmitter mounting (for H1x versions)
APT1
Adapter for flat head
KME1
Cable outlet, nickel silver, Ex d, M20x1.5, IP 68, for fixed assembly cable with diameter 4 to 8.5 mm
KME2
Cable outlet, nickel silver, Ex d, M20x1.5, IP 68, for fixed assembly cable with diameter 6 to 12 mm
KME3
Cable outlet, stainless steel, Ex d, M20x1.5, IP 68, for fixed assembly cable with diameter 4 to 8 mm
KME5
Cable outlet, polyamide, Ex ie, M20x1.5, IP 68, for fixed assembly cable with diameter 5 to 9 mm, operating temperature -20 to +95 °C
KME6
Cable outlet, polyamide, Ex ie, M20x1.5, IP 68, for fixed assembly cable with diameter 6.5 to 12 mm, operating temperature -20 to +95 °C
3-year warranty
Example of order: P5311 H11 QR
For code QR configuration sheet DB2298 is required to the order.
• ... Ex stock version ° ... Marked version can be dispatched up to 5 working days (with calibration up to two weeks)
1)
… Possibility of installing one transmitter
2)
… Possibility of installing up to three transmitters
3)
… Possibility of installing two transmitters
Field configurator for LHP transmitters, function of transmitter supply, without charging
°
°
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
7. Ordering information
7.1 Ordering table
