JRC jue-87, Instruction Manual, Page: 39 / 230

2-9
2
2.2.2 IME (Internally Mounted Equipment: NTF-318)
IME is consists of Interface Unit, Power Supply Unit, Process Circuit, Color LCD Unit, I/F Circuit
and USB I/F Circuit.
Fig.2.2.2a IME
Table 2.2.2a The LED Indicates the MES Status (Refer to Fig.2.2.2a)
NAME ON OFF
(2) POWER LED MES power on MES power off
(3) READY LED MES receives NCS TDM carrier
correctly. MED does not receive NCS TDM
carrier correctly.
(4) COMM LED MES is communicating. MES is idle.
Table 2.2.2b The Switch and the Button Function (Refer to Fig.2.2.2a)
Name Function Remarks
(1) Screen Angle Adjust
Knob
Used to adjust the screen angle (up
to 25digrees) to clearly.
(5) Distress Button
Used to send Distress Alert
(6) Dimmer Button
Used to adjust the screen and each
LED (POWER/READY/COMM)
dimmer.
(7) POWER Switch
Used to turn on MES power
(8) USB Port Connect an USB flash memory.
Display
(1)
Screen Angle
Adjust Knob
(2)
POWER LED
(3)
READY LED
(4)
COMM LED
(8)
USB PORT
(5)
Distress BUTTON
(7)
Power SWITCH
(6)
Dimmer BUTTON
Keyboard