JRC jue-87, Instruction Manual, Page: 165 / 230

3-105
3
Step Operation IME/DTE Response
1
•
Hold down
Alt
key and press
A
key on Main Menu.
•
“Diagnostics” window is displayed.
2
•
Move the cursor to “distress button
Test” and press
Enter
key.
•
“ Distress Button test mode ” window is
displayed.
3
•
When the distress button is tested,
press the distress button till the buzzer
sounds for about 5 seconds or more.
•
When the distress button test is
terminated, press
F7
( “Cancel” ) key.
•
The buzzer in DTE and IME is sounding 0.5
sec on, 1.0 sec off. Then,
“SOS” is displayed
at the first line of DTE
•
The buzzer sounding for about 30 seconds.
4 •
(It passes 5 sec after pressing the
distress button.)
•
The buzzer in DTE and IME is sounding 0.5
sec ON, 0.5 sec OFF.
•
The “Distress” lamp on IME is blinking 0.5
sec ON, 0.5 sec OFF.
•
“Distress Button Test” window is displayed.
Data source contents
Alarm history
software Version
distress button Test
F10: Previous
Diagnostics
Distress buttons are under test now.
Press the distress button to test it.
If real distress alert to be sent,
Cancel the test mode.
F10: Cancel
Distress button test mode
--- Distress Button Test ---
Now distress button testing ---
F10: Cancel