JRC jue-87, Instruction Manual, Page: 125 / 230

3-65
3
(2) Address number selection
Step Operation IME/DTE Response Remarks
1
•
Move the cursor to
“Transmit” and press
Enter
key, on main menu.
•
The “Transmit” window
is displayed.
2
•
Move the cursor to the
service type to register the
address number, and press
Enter
key.
•
Selected service window is
displayed.
3 •
Move the cursor to
“Destination code” and
press
Enter
key.
•
The “Destination”
window is displayed.
4 •
Press
F2
( “Address book
code” ) key.
•
The “Address book code”
window is displayed.
5
•
Select the address number
by cursor key and press
Enter
key.
•
The line of selected
number is displayed in
reverse.
6
•
Press
F10
( “Previous” )
key.
•
The specified destination
number etc. is displayed on
the
“Destination” menu.
•
When the multi address
function is used, press
Enter
key instead of
F10
key, and select the
number.
After confirmation,
press
F10
( “Previous” )
key.
•
Note 1
7 •
Press
F10
( “Previous” )
key.
•
“Telex” window is
displayed.
8 •
Set the other request
parameter and press
F1
( “Send Call” ) key when
you want to send a call.
•
The “Main Menu” screen
is displayed.
•
Communication can be
start.
Note 1)
Using Multi address function, message can be sent up to 5subscribers whom destination codes
are same.
Multi address function is optional facility of each LES. Depends on LES, this function is not
offered.