JRC JSS-2250, Instruction Manual

Page: 125 / 220

Operation
4-75
The screen at right is displayed, and
operate in the same way for making
safety and urgency calls to areas.
- To specify the northwest corner and
the south/north and east/west
deviation, select Corner/dev at
Format and press ENT in the
screen shown at right (below), and
input appropriate values.
5
55
.
..
Select Call and press ENT to tune the
antenna and make a distress relay call.
After completing the individual
distress relay call to a coast station,
wait for the acknowledgement as
with the drobose call mentioned
above.
6
66
.
..
After sending a distress relay call to a coast
station, and when the acknowledgement is
received via DSC, the screen at right is
displayed.
¾ The ALM lamp starts blinking, and the
call alarm gradually grows louder.
¾
Press either the CANCEL key or ENT to
silence the alarm and display Accept in the
handling menu.
¾
Select Accept and press ENT to display the
status display and start distress
communication on the radiotelephone.
Note