manualshive.com logo in svg

JRC JMA-9172-SA, Instruction Manual

Share
Download
JRC JMA-9172-SA Instruction Manual Download Page 90

2

－

30

JMA-9172-SA Instruction Manual

 > 

2.CONTROL PANEL KEYS and SOFTWARE BUTTONS

 > 

2.3  FUNCTIONS OF SOFTWARE 

BUTTONS

 

Display item switching

The brilliance adjustment screen and display information setting screen interchange 

whenever this button is clicked.

 

Panel lighting brilliance switching

This function enables the setting of the brilliance of the lighting of the control panel.
The brilliance changes whenever this button is clicked. Five levels of settings are 

available.

 

Radar video brilliance switching

Adjust the brightness of the radar video (echo).
The brilliance changes whenever this button is clicked. Four levels of settings are 

available.

 

Tracked target / AIS target symbol brilliance switching

Use this function to adjust the brilliance of the tracked target / AIS target symbol.
The brilliance changes whenever this button is clicked. Five levels of settings are 

available.

 

Day / night mode switching

The day / night mode is switched whenever this button is clicked.

 

  

→

  

  

→

  

  

→

  

     

　　

  

  

←

  

  

←

    

  

←

 

 

 

User map load

If this button is clicked, the user created map read menu is opened.

 

User setting load

If this button is clicked, the user setting read menu is opened.

1

⇔

2

3

4

5

Day1

Day2

Day3

Dusk

Day2

Day3

Dusk

Night

6

7

Summary of Contents for JMA-9172-SA







































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands