JRC JMA-9172-SA, Instruction Manual

Page: 207 / 486

JMA-9172-SA Instruction Manual
>
3.BASIC OPERATION
>
3.8 APPLIED OPERATIONS
3 － 111
3
• When the course-bar graph is displayed, the sizes of the target tracking (TT)/
AIS numeric data display areas are exclusively decreased.
•
Left-click the button located at the lower righit of the display. The
course bar display function is switched between On and Off.
[2] Autopilot Course
• Determine which field of the APB sentence that has been received is used to
display AP course.
[3]
ROT Scale
•
Set the maximum scale for the TURN Rate graph.
3.8.9 AUTO Backup
Data can be automatically backed up when the power supply is turned on.
Procedures
1) Insert a flash memory card into the card slot.
: The course bar graph is not displayed.
: The course bar graph is displayed in digital information area 1.
: The course bar graph is displayed in digital information area 2.
：
Heading to Steer to Destination
：
Bearing Origin to Destination
：
Bearing, Present Postion to Destination
: The scale is set at ±30°/min.
: The scale is set at ±60°/min.
: The scale is set at ±90°/min.
: The scale is set at ±120°/min.
: The scale is set at ±150°/min.
: The scale is set at ±300°/min.
Target
Off
Area1
Area2
Course to Steer
From Origin
From CURR POSN
30-0-30
60-0-60
90-0-90
120-0-120
150-0-150
300-0-300