manualshive.com logo in svg

JRC JMA-9172-SA, Instruction Manual

Share
Download
JRC JMA-9172-SA Instruction Manual Download Page 304

5

－

52

JMA-9172-SA Instruction Manual

 > 

5.OPERATION OF TARGET TRACKING AND AIS

 > 

5.6  TRACK FUNCTION

[3]

Erasing File  (Erase)

Procedures

1)

Insert the flash memory card into the card slot.

Flash memory card (option) is necessary.

2)

Open the File Operations menu by performing the following 
menu operation.

→

 

→

 

3)

Left-click the item button of 

 to select a card 

slot.

The setting item for Select Card Slot is switched between Slot1 and Slot2.

4)

Left-click .

The Erase menu will appear.

Currently saved target ship's track data on the card will be listed.

5)

Left-click the button corresponding to the file to be erased.

The Confirmation Window will appear.

6)

Left-click 

 to erase the file.

The selected target track data will be erased and the file name will disappear from the list.

TT

2. Target Track Setting

7. File Operations

1. Select Card Slot

5. Erase

1. Yes

Summary of Contents for JMA-9172-SA







































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands