JRC JMA-9172-SA, Instruction Manual

Page: 347 / 486

JMA-9172-SA Instruction Manual
>
7.SETTINGS FOR SYSTEM OPERATION
>
7.2 SETTINGS
7 － 19
7
2)-5. Display Style
2)-6.
Synchronize with GPS
7.2.7 Input Installation Information
The system can input installation information.
Procedures
1) Open the Serviceman Menu.
2)
Perform the following menu open procedure to open the
Installation Information setting menu.
→
3)
Input the installation information.
For the input method on the numeric value and character input screens, see Section 3.3.4
"Operation on Numeric Value, Latitude / Longitude and Character Input menu".
7.2.8 Setting the Alarm System
7.2.8.1 Setting the reset interval (Reset Interval)
This function enables the control of WMRST terminal (on the terminal board
circuit).The reset signal is turned on when operation in a set period of time.
Set one of the following date display formats.
ex) 2007-12-31
ex) DEC 31, 2007
ex) 31 DEC, 2007
A ZDA sentence sent by the GPS is used, thereby displaying time
synchronized with the GPS time.
i
：
i. If On is selected for this item but a ZDA sentence is not input, the system
internal clock function is used to display the date and time.
Time synchronized with the GPS time
：
Time not synchronized with the GPS time
Input the date of installed system.
Input the name of installation personel.
Input the name of radar installer.
YYYY-MM-DD
MMM DD, YYYY
DD MMM, YYYY
On
Off
Main
1. Installation Information
Date
Name
Company