JRC JFS-280, Instruction Manual

Page: 83 / 328

3-21 3 Operating procedures
3
Inputting numbers with the number keys
(1) The number keys from [0] to [9] can be used to input values in value input mode while
a "Menu" is open.
(2) While value input mode is on, pressing a number key reflects the changed value in the
item.
(3) Each time a number key is pressed, the number moves one decimal point to the left so
the number that is pressed appears in the first decimal place. If the value exceeds the
decimal places that can be input, the extra numbers are invalid. If a value has already
been entered, input a 0 if you want to input a value that has fewer digits than the
maximum.
Example: When setting [CLUTTER].
The following shows how to change an initial value of 1 to 0.
Initial value = 1 changed to 0
Use the number keys to input 0.
Use the number keys to input 0.
Press the [ENT] to set the value
Example: To set 255 when 128 is already set in a 3-digit setting.
"128"→"255" "128"→"010"
[ENT] key
Display
(set value)
[ENT] key
Display
(set value)
Initial status 128 Initial status 128
[2] 282 [0] 280
[5] 825 [1] 801
[5] 255 [0] 010