JRC JFS-280, Instruction Manual

Page: 200 / 328

6 Operation Settings 6-52
6
6.4.4.3 Displays
This is the menu item for setting the method to display water temperature graphs.
Operating Procedure Press the keys "8 → 4 → 4 → 2 → 1" to go to
TEMP/DEPTH settings
Turn the [MULTI] knob to select "1. TEMP/DEPTH".
Press the [MULTI] knob to display the pulldown menu.
You can change the display according to the sensor
that is attached.
Turn the [MULTI] knob to select the connected sensor.
Press the [MULTI] knob to set it.
Display examples:
Water temperature display
Water depth display Water tempe
water depth display
If only the water temperature sensor is connected, select and set "1. TEMP".
If only the water depth sensor is connected, select and set "2. DEPTH".
If both the water temperature and water depth sensors are connected, select and set "3. TEMP
+ DEPTH".
Alternatively, select one of the sensors, even if both of the sensors are connected but one
display is not needed. The initial value is set to "3. TEMP + DEPTH".