JRC JFS-280, Instruction Manual

Page: 233 / 328

6-85 6 Operation Settings
6
6.7.6.1 Settings for Fish Finder Shift
This is the settings menu for adjusting the fish finder shift.
Operating Procedure Press the keys "8 → 7 → 6 → 1" to go to SHIFT settings
Turn the [MULTI] knob to select "6. NEXT". Press the
[MULTI] knob to move to the menus in "NEXT".
Turn the [MULTI] knob to select "1. SHIFT". Turn the
[MULTI] knob to display the menu for inputting values.
Set the values according to the fish finder that is
connected.
The setting range for fish finder shift is between 0 m and 900 m, and can be set in steps of 1 m.
The initial setting is set to 0.
6.7.6.2 Setting the Fish Finder ADC
This is the settings menu for adjusting the fish finder shift.
Operating Procedure Press the keys "8 → 7 → 6 → 2" to go to ADC settings
Turn the [MULTI] knob to select "6. NEXT". Press the
[MULTI] knob to move to the menus in "NEXT".
Turn the [MULTI] knob to select "2. ADC". Turn the [MULTI] knob to display the menu for
inputting values. Set the values according to the fish finder that is connected. The setting range
for fish finder ADC is between 1 and 8, and can be set in steps of 1. The initial setting is set to 1.
6.7.6.3 Setting the STC for Fish Finder 1
This is the settings menu for adjusting the STC for fish finder 1.
Operating Procedure Press the keys "8 → 7 → 6 → 3" to go to STC1 settings
Turn the [MULTI] knob to select "6. NEXT". Press the
[MULTI] knob to move to the menus in "NEXT".
Turn the [MULTI] knob to select "3. STC1". Turn the [MULTI] knob to display the menu for
inputting values. Set the values according to the fish finder that is connected. The setting range
for the STC of fish finder 1 is from 0.0 to 10.0, and can be set in steps of 0.1. You can remove
the noise near the sending line. The initial setting value is set at 0.0.