JRC JFS-280, Instruction Manual

Page: 174 / 328

6 Operation Settings 6-26
6
6.2.3 Split Display
You can set the system to show the audio image or the fish finder image on the sonar image
screen.
Operating Procedure Press the keys "8 → 2 → 3" to go to SPLIT DISPLAY
settings
Turn the [MULTI] key to select "3. SPLIT DISPLAY".
Press the [MULTI] knob to display the submenu, select
either "1. AUDIO" or "2. F/F", and then set it.
The "2. F/F" menu is masked unless you have
connected the fish finder in the "INITIAL SENSOR
CONNECTION" settings.
6.2.3.1 Audio
You can also display the image of the direction of the sound you are hearing. To display it, you
need to press the [DISPLAY MODE] key.
Operation Procedure Press the keys "8 → 2 → 3 → 1" to go to AUDIO
settings
Turn the [MULTI] key to select "1. AUDIO". Press the
[MULTI] key to display the pulldown menu.
Turn the [MULTI] key to select "2. ON". Press the
[MULTI] key to set "2. ON".
After doing the above settings, press the [DISPLAY
MODE] key to display the split display as shown in the
diagram on the left, and the sound detection image is
displayed.