17. Control Panel Description
17.1 C-Panel Operational
When power-on start or reset the panel, the key will be locked and need user to unlock it. After user left it
after 10 minutes for not using, the panel will lock the keys automatically.
17.1.1 Lock and unlock
at least 1 sec, till 4 beeps sound.
The panel will be unlocked.
Press
z
After unlock the panel, to do this proceedure again will lock the panel.
z
Keep unprocees this panel for 10 minutes, the panel will lock the key function automatically.
z
After unlock process, the display will show “unloc”; after lock process, display will show “loc”
17.1.2 Change mode
Press
At any status
Î
By pressing this bottom, can enter these different modes sequentially:
z
Monitor mode
z
Parameter mode
z
Alarm mode
17.1.3 Monitor mode
Select the monitoring item
Press
or
When in
Monitor mode
Î
By using the up/down keys, can select the monitoring item:
z
N
Motor’s speed.
z
Hz
The output frequency.
z
A
Output current.
z
V
Output voltage.
To run or stop the motor
Press
twice
(within 0.5sec)
When in
monitor mode
Î
Will start the motor to run, or
Press
twice
(within 0.5sec)
When in
monitor mode
Î
Will stop the motor.
www.jps.com.tw
96
