ARA-1 Operations Manual
INTEROPERABILITY NOW
3-21
3.6.2
Firmware Upgrade
The ARA-1 is designed to support firmware updates in the field. Please contact JPS Customer
Support or visit the JPS Interoperability Solutions website as noted at the start of this manual.
On the right side of the page all ARA-1 related downloads are listed.
The
Status/Information
page of the ARA-1 will list the currently loaded firmware so that you can
determine if an upgrade is needed. If you need an update, instructions will be emailed that will
allow the download of the latest firmware. Download the new firmware file to your computer.
Next, from the ARA-1’s
Status/Information
page, use the
Browse
button to locate the file and
click
Upgrade
to load the firmware into the ARA-1.
3.6.3
Remote Reboot of the ARA-1
Click the
Reboot
button if it becomes necessary to remotely reboot the unit.
3.7
Resetting the ARA-1 to Factory Defaults
If you find it necessary to reset the ARA-1 to its factory default state (for example, if you have
forgotten the IP address or the password), you can reset all the settings to the factory default
settings by pressing and holding
SW1 (Defaults)
on the rear panel for 5 seconds. The switch is
recessed to prevent accidental use. Use a pointed object such as a pen or paper clip to press and
hold the switch.
NOTE:
All settings that you have entered will be lost and reset to factory defaults
if you do this.
End of Section 3