ARA-1 Operations Manual
INTEROPERABILITY NOW
3-3
3.2.2
Network Settings
The Network Settings page is where all network parameters are set.
Figure 3-2
Network Settings Page
If you select
Static
from the Boot Protocol drop-down menu, then you must adjust the other
settings to match your particular network. If you select
DHCP
as your boot protocol, then your
local DHCP server will assign these values for you. When you have made any necessary changes,
click
Save
at the bottom of the page. These settings are not actually applied until the unit is
restarted, so you can continue to make other changes if necessary. Now click on
SIP Settings
for
the next page.
3.2.3
SIP Settings
The SIP Settings page is where you will configure the SIP settings for this device. The ARA-1
can register with a SIP PBX, or it can operate as a standalone device.
Note that theARA-1 settings will most often depend on the requirements of the SIP
communications device/system that the ARA-1 is being connected to.