JPS ACU-5000, Installation And Operation Manual, Page: 68 / 86

ACU-5000 Operations Manual
9-2 Interoperability Now
buttons on the left; the net will darken to indicate that it is selected), and then click the channels.
The channels may display a grayed-out box from the net they were in before being moved. This
indicates that the channel move is not yet final, and serves as a temporary record of the channel's
previous net assignment. To finalize the change, de-select the net (by selecting it or by selecting
a different net). To cancel the change prior to the finalization, click on the grayed-out channel.
Note that after any two channels are clicked to enter an empty net, that net is selected and ready
for additional channels to be added.
If an operator prefers to not use the grayed out boxes as confirmation of a desired change (thereby
eliminating a step), this can be changed through the Net Control Preferences.
The screen shot below shows two active nets:
Net 1 connects the channel zero handset with channels four and six (both configured as radios).
Net 2 connects channel 1 (a PSTN channel) with the channel 2 (another radio channel).
Moving a channel back up to the 'Free' net terminates that channel’s current communications
(again, Monitor Mode operation is an exception). Alternatively, to disconnect all of the channels
in a net, click the 'Disband Net' button, then click the net to disband them (or click the net first
then click 'Disband Net'). Alternatively, drag & drop the Net icon over the Free icon. Again, the
grayed-out box will be visible until the operation is finalized by deselecting the "Free" net by
clicking the “Free” net or initiating another activity by clicking on any other net.
Again, if an operator prefers to not use the grayed-out boxes as confirmation of a desired change
(thereby eliminating a step), this can be changed through the Net Control Preferences.