13
12
14
Unit Operation
Unit Operation
Unit Operation
Applying the Arm Cuff
1. Firmly insert air plug into opening located on behind side of monitor unit.
2. With sticky nylon section facing outward, insert end of cuff underneath metal ring
of cuff
3. Fasten cuff about
above the elbow joint. For best results apply cuff to
bare arm and keep level with heart while testing
.
1-2cm (0.4-0.8'')
.
3. Time Format setting
Press
“
SET
”
button again to set the time fornat setting mode.Set the time format
by adjusting the
“
MEM
”
button. EU means European Time US means U.S Time.
7. Saved Settings
6.Volume Setting
Press "SET" button to enter volume setting mode. Set the voice volume by adjusting
the "MEM" button . There are six volume levels.
While in any setting mode, press " START/STOP " button to turn the unit off. All
information will be saved.
Note: If unit is left on and not in use for 3 minutes, it will automatically save all information
and shut off.
Unit Operation
System Settings
With power off, press "SET" button to activate System Settings. The Memory Group icon
flashes.
1. Select Memory Group
While in the System Setting mode, you may accumulate test results into 2 different
groups. This allows multiple users to save individual test results (up to 150 memories
per group.) Press " MEM " button to choose a group setting. Test results will
automatically store in each selected group.
2. Time/Date setting
Press
“
SET
”
button again to set the Time/Date mode. Set the year first by adjusting
the
“
MEM
”
button.
Press
“
SET
”
button again to confirm current month. Continue setting the date, hour
and minute in the same way. Every time the
“
SET
”
button is pressed, it will lock
in your selection and continue in succession ( month,day,hour, minute,12/24 hours)
11
AM
AM
5.Voice Setting
Press "SET" button to enter voice setting mode. Set voice format ON or OFF by
pressing the "MEM" button.
4.Unit Setting
Press "SET" button to enter unit setting mode. Set format bypressing the "MEM" button.
mmHg