17
In order to fix the crib to the parents bed use the pair of straps provided. Fix the buckles underneath
the crib on both sides (Fig.10). Next, fix the straps around the structure slats of the parent’s bed
(Fig.11), from the bottom towards the top and fasten the buckles below the crib to finish (Fig.12).
To secure the crib to the parent’s bed, pull the straps once again to make sure the crib is properly
and firmly secured to the parent’s bed (Fig.13-14).
If the operation of attaching the crib to the bedstead does not allow the feet of the crib to
pass under the parents’ bed, the crib may be attached in any case by following the instructions
described in the previous points and adjusting the length of the feet, as shown in the paragraph
referring to “leg adjustment”.
WARNING: make sure that the straps are not twisted.
WARNING: The height of the parents’ mattress must be
higher than or the same as that of the side of the product. If
this is not the case, use the adjustment system to achieve
this condition on both sides (Fig.15).