www.joy
-
it.net
Pascalstr. 8 47506 Neukirchen
-
Vluyn
2. Device connection
1.
Connect
Power Only Interface of the LCD to a 5 V 2.4 A microUSB
power supply.
(Normally, the LCD will reset the output on the display and perform
a self test).
2.
Connect the HDMI interface of the LCD with the HDMI interface of
your Raspberry Pi with a HDMI cable.
3.
Connect the touch interface of the LCD to one of the USB interfaces
of your Raspberry Pi.
4.
Insert a microSD card into the card socket of the Raspberry Pi,
connect your Raspberry Pi to the power supply and then switch on
the Pi.
(Now you can adjust the backlight of the LCD with the
backlight
adjustment button. See the marking in the following picture.)
1
2
2
3
3
4
4