20
139775_R
03
_GI 535 DV IPI June 2016
7.7 Install Optional Reflective
Glass Panels
157879 Reflective Glass Kit
• Left Panel - 225908
• Right Panel - 225909
• Rear Panel - 225910
• Side Panel Shelf, (2) - 225929
• Cotton Gloves
1. Carefully unpack the panels and set each on carpet or
other protective material.
The panels will be installed
with the textured surface facing against the firebox
walls.
2. Use pliers to bend the perforated tabs (A) to support
the Rear Glass Panel as shown in fig. 7.13. Set the tabs
at enough of an angle to keep the panel (B) lying back
against the rear wall.
Place each Side Panel Shelf, (C) oriented as shown, on
top of the steel spacer brackets between the burner
and the side walls.
3. Slide each Side Panel (D) into position flat against the
firebox side, resting the bottom edge on the support
shelf, fig. 7.14. Push each side panel back against the
rear panel.
Locate the retainer tabs at the top of the firebox (E)
and use the screwdriver to pry each down enough to
secure the side panels in place.
Tools Required
Flat Head Screwdriver
Pliers
Safety Glasses
SKIN OIL IS DIFFICULT TO REMOVE FROM THE
GLASS SURFACES. USE THE GLOVES PROVIDED TO
PROTECT THE PANELS FROM FINGERPRINTS.
Fig. 7.13
Fig. 7.14
DO NOT OVER-BEND THE TABS AS
GLASS BREAKAGE COULD OCCUR.
BEND TABS ONLY ENOUGH TO KEEP
THE PANELS FROM FALLING FORWARD.
