19
ENGLISH
3.9 Ash removal
1. Lift out the ash retainer
2. Use a shovel or similar and scrape out the ash.
3. Leave a little ash in the bottom of the combustion chamber
as a protective insulating layer.
Optional equipment includes a solution for dealing with ashes.
See the section:
«5.0 Optional equipment».
For the rest, see description of how to handle ash in the Manual
on general use and maintenance in Point
«6.1 Fire preventive
measures».
4.0 Service
Warning!
Any unauthorised change to the product is illegal!
Only use original spare parts!
4.1 Changing the burn plates, base plate
and baffle plate (fig. 6-7)
1. First remove the ash retainer
(7A)
.
2. The
baffleplate
(6A)
, which is resting on the burn plates, has
to be edged down and lifted out.
3. Lift the base plate
(7B)
up and out
4. Remove the burning plates
(7C)
.
For re installation follow the same procedure in the opposite
sequence.
5.0 Optional equipment
5.1 Ash solution - Cat. no.: 350718
The kit consists of :
New rear bottom plate-Ash grate-Ash pan-One bag of screws.
Assembly instructions are included with the product
Summary of Contents for I 150 FL
